08 / Pollution Monitoring

OWS, OCM & 15 PPM Bilge Alarm

Calibration, functional testing and troubleshooting for oily-water separator monitoring and 15 PPM bilge alarm systems.

Onboard calibration and functional testing for marine pollution monitoring equipment

Service Overview

Confirm measurement, alarm and discharge-control response.

We inspect the measuring cell, sample flow, alarm monitor, output contacts and associated control sequence. Work is focused on stable measurement and correct alarm or diverting response under the agreed test conditions.

Scope of Work

Monitor and measuring-cell inspection
Zero and span response verification
Sample flow and line-condition checks
15 PPM alarm simulation
Alarm relay and output-signal testing
Automatic stopping or diverting response check
Cleaning, adjustment and fault diagnosis

Supported Equipment & Systems

Oily water separator monitoring system
Oil content monitor (OCM)
15 PPM bilge alarm
Sample cell and optical assembly
Sample pump and flow switch
Alarm relay and discharge-control output
Recorder and system interface

Working Process

A clear technical path from attendance to action.

Every job is adapted to the installed equipment, vessel condition and agreed scope of work.

Inspect

Review monitor condition, sample flow and system status.

Test

Verify zero, span and applicable alarm response.

Diagnose

Trace unstable readings, flow or output faults.

Report

Record results and the final operating condition.

Discuss this system with our technical team.

Send the equipment brand, type, reported condition, vessel location and available photos.

WhatsApp Technical Inquiry